Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

• Compatibility: Windows 7 - 64bit

• The RAVENNA ASIO driver is available for Horus users that wish to use their notebook GbE Network RJ-45 system socket.

• AES67 (Horus/Hapi at 48 frame latency) not supported in ASIO 

Installation Steps:

Installation Guide

1. Install the Merging Ravenna ASIO Driver provided with your Horus or available from the Merging Website.

2. We recommend that you reboot your system after the installation.

3. Once your system has booted, launch the RAVENNA ASIO panel from the Windows start menu and select the Local Adapter where the Horus is connected to, recommended buffer size are available in the Ravenna Asio Guide 

4. With usage along with Pyramix. Launch the VS3 Control Panel (Start Menu > Control Panel > VS3 Control Panel) and select the RAVENNA ASIO and the correct card/device in the VS3 Control Panel (Start Menu > Control Panel > VS3 Control Panel)

The Merging NET-MSCGBEX1 card will not function for RAVENNA ASIO use. 
RAVENNA ASIO user should have administrator rights. 
We recommend users to Disable the WIFI and Bluetooth if they are active (under Windows Device Manager) 

About the number of channels, we recommend you to set it to the number of channels you will really use.

If you set to 64 channels, but only use 8, the remaining 56 channels will still consume some power processing.

  • No labels