MERGING+PLAYER and MERGING+NADAC firmwares are not compatible ! |
Step-by-step guide
Download the latest MERGING+PLAYER firmware:
Firmware_3.9.9_42230.NADAC-PLAYER
Recent firmware are larger than previous ones and could take longer to update, never abort an update process.
Confirm the reboot to maintenance mode by clicking on Yes.
If your MERGING+PLAYER is shut down, you can also press & hold the Volume button and push the Power button to have it start in Maintenance mode. |
Check your Maintenance version : please have a look at your MERGING+PLAYER display.
You will see your Maintenance mode version : V0xx
At the Firmware update users could be warned that their Maintenance Mode is not up to date. In such case it is important to follow the Maintenance Mode update procedure prior to updating to the latest Firmware. Version V046 is required. If your Maintenance version is not V046, you will first need to update the Maintenance mode before applying the most recent firmware update. |
Start your default web browser (Merging recommends Google Chrome or Apple Safari), and enter the following address:
http://yourNADACPLAYERIPADDRESS:8080 |
In the example below, the MERGING+PLAYER IP address is 10.0.0.32.
This address is then automatically translated and redirects you to the firmware update page.
During update do not update or refresh your browser (F5), until the process is completed. The Firmware update should take from 3 to 5 minutes. Do not perform any other installation during the firmware upgrade. Do not shutdown the MERGING+PLAYER during the update. |
Wait until the webpage says “Update successful!” and the MERGING+PLAYER screen displays “Please Shutdown”.
Shutdown your MERGING+PLAYER after the Firmware update by clicking on the "Reboot device" button in the web page, it will restart automatically afterwards.
You can verify the firmware version installed by going into the MERGING+PLAYER Setup menu and selecting Info. The firmware version and date will be displayed.
If you had to change your computer IP address for the firmware update, you may now set it again to your preferred IP address. |
Please also check that your Roon is up to date, see this page for further details.
IMPORTANT: If the Firmware update procedure fails, repeat the Firmware update procedure by pressing the “Try Again’ Button (it will bring you back to step 7) Avoid powering down the MERGING+PLAYER if the firmware update has failed. Contact your nadac@merging.com and your local Sales partner if your firmware update cannot be executed. |