A Merging device and a Merging Driver is all you need to UNITE and simplify your RAVENNA/AES67 network streams connectivity without the need of an additional software such as ANEMAN.
Merging+Anubis running the Music Mission, Horus, Hapi and Hapi MKII are compatible with the Unite mode. |
UNITE is an automatic AoIP Stream patching feature that allows a user to quickly connect IO streams between the Anubis and the System/Driver without the need of ANEMAN. Without any AoIP knowledge or additional application you can now connect your devices and be operational quickly.
Expand your IO by adding a Merging RAVENNA/AES67 interface on your network or directly connect it to Anubis, peer some of those IO’s and once performing UNITE all those IO can be made available in your DAW.
Note : Unite and Peering features are using Unicast connections only, meaning that the connections are point-to-point only. For more complex setup, please use the RAVENNA/AES67 mode (allowing Multicast).
PEER your additional device IO from Anubis and those IO’s will immediately be available in your Anubis Mixer, it will expand your Mixer Channels and Output Channels
Control, Mix, Record or Route those IO's to any available device online without the need of any system/DAW.
Note: Peering does not require a system (Pc/Mac) it can be performed with two standalone devices.
Music Mission : Peering is available only in the Expert Operation Mode. Enable the Expert mode from the Settings.
For more details on Peering, please see the Anubis Music Mission manual.
Prerequisites
Unite simplifies your AoIP connectivity by bringing you a quick automatic stream patching.
Prerequisites
Unite simplifies your AoIP connectivity by bringing you a quick automatic stream patching.
Provides full control over your AoIP RAVENNA/AES67 streams connections, using ANEMAN Audio NEtwork MANager.
Select the RAV/AES67 mode tab
VAD RAV/AES67 mode MAD RAV/AES67 mode
Launch ANEMAN:
Launch ANEMAN that is installed as of MAD 2.0 and above. ANEMAN is an Audio NEtwork MANager, that will allow you to connect, monitor, and manage your networked audio devices.
Follow the ANEMAN Quick Connection Guide for more details.
ANEMAN - Quick Connection Guide
Note. The ANEMAN User Guide is installed along the VAD and MAD
Anubis Music Mission | ||||
---|---|---|---|---|
Inputs | Physical Inputs | Anubis inputs Combo 1/2 and Line-Instrument 3/4 | ||
Built-in Mic | Anubis Built-in Talkback | |||
Bus Returns | Anubis Music Mission returns: Mix, MixAlt, Cues, Reverb, Dynamics. Connect for record back | |||
Peered Inputs | Applies to users with another Merging RAVENNA/AES67 Interface that was peered by Anubis, refer to the Anubis User Manual. | |||
Outputs | DAW | Your DAW or Application Software Output Playback (stereo) | ||
AUX 1 to 5 | Additional Software Output Playback stereo pairs for your DAW or Application. | |||
Additional Inputs | AES67 Generic Streams (up to 48 channels). Requires AES67 compatible devices and Anubis running Music Mission. |
Horus | ||
---|---|---|
AES 1 | AES 2 | AES 3 |
Slot 1 | Slot 2 | Slot 3 |
Slot 4 | Slot 5 | Slot 6 |
MADI | MADI Extension | Headphone |
Hapi MKI / MKII | |
---|---|
AES 1 | ADAT/SPDIF |
Slot 1 | Slot 2 |
MADI Extension | Headphone |
At the top of your Mac taskbar you will find the UNITE Status cross icon
VAD Panel green cross icon – Proper operational state
VAD Panel red blinking cross – Potentially Connection issue.
Click on the Blinking Cross icon to open the VAD Panel and view the error reported.
“Invalid connections”
Resolution: In the example here, the solution is to Re-Unite.
MAD Panel white cross icon – Proper operational state
MAD Panel red blinking cross – Potentially Connection issue.
Click on the Blinking Cross icon to open the MAD Panel and view the error reported.