Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

The MT Updater offers a convenient and easy to keep your Merging devices up-to-date.


DO NOT TURN OFF THE COMPUTER OR THE DEVICE WHILE PERFORMING A FIRMWARE UPDATE.



Status

In the Network Discovery zone, an orange dot shows that an update is available for your Merging device(s).


Right click on the device and select Show Available Updates to open the MTUpdater.

Note: An active internet connection on the computer is required.


MTUpdater

The MTUpdater window shows the update status of your devices.



Download & Update
The MT Updater will download the firmware and start the update.
When the update is finished, the MT Updater will automatically reboot the device.
Note: Related firmware components like Anubis Remote Control will also be downloaded and installed.

Download only
The MT Updater will download the firmware in your Downloads/MT folder (Windows)
You may decide when you want to update your device, whether it is manually through the Maintenance pages (see the device User Manual for details), or by using the MT Updater.

Update
The MT Updater has detected that the latest firmware available has already been downloaded in your Downloads/MT folder (Windows).
Update will start the firmware update.
When the update is finished, the MT Updater will automatically reboot the device.
Note: Related firmware components like Anubis Remote Control will also be installed.
An active internet connection on the computer is not required in such case.

Your_Device_Name is up to date
Your device is already running the latest firmware available.

Note for Horus and Hapi 1st gen:
As the firmware update requires to reboot the device in Maintenance mode, the firmware update has to be performed manually (see the device User Manual for details).


Troubleshooting

  • Failed to contact Merging Technologies Server

    A connection cannot be established to the Merging Technologies server.
    Please verify your internet connection or retry later.
    Note: if a firmware is present in your Downloads/MT folder (Windows), you may update the device without an active internet connection

  • Software/Firmware update has been disabled by your administrator

    The updater has been disabled, please contact your system administrator.

  • No compatible software/hardware has been detected

    Please make sure that your Merging Technologies hardware is connected to the computer.
    Please also verify it is detected in MT Discovery, Aneman, MAD Panel or VAD Panel.




  • No labels