Page Comparison

...

1. Plug a network cable to the router and to your pc.

2. Make sure your computer haves a IP configuration in the 192.168.1.x network address pool.
   
   

   Info
   title Default Network Access config.
   The Cisco routers/switch's come with a default config network configuration in that address pool , so . So in order for your computer to communicate with it, it will also require it to be in that same address pool , that . That can be changed in the routers/switch configuration page once you are in. You can find more information about it in the CISCO users manual in page 8

   Info
   title Access the Administration Page.
   http://192.168.1.254 Enter the default user name: cisco Enter the default password: cisco

3. Open a navigator page to navigate to: http://192.168.1.254
   Image Removed
   

   Info

   title	Access the Administration Page.

   You

   , you can use any navigator to do that

   , once

   .

   Image Added
   
   Once the page loads you will be prompted to

   
   

   enter the user name and password to login.

   Image Added
   Enter the default user name: cisco
   Enter the default password: cisco
   
   After the login it will prompt you to to change that to whatever you want.
   

   Image Added
   It is recommended to do so

   . Enter

   , enter whatever user name and password you want

   .
   After setting this up, it will probably ask you for a reboot (if it does not, reboot it manually)

   .

   After reboot, and you will have to login with the new user name and password you just setup.
    
4. The Administration page will now load and you cant start configuring your switch.
   
   Image Added