Page Comparison

Here is how to check/change the QoS settings for VLAN2By default the QoS settings setup by CISCO are ok for Ravenna AES67, but if you need to change them
for your own needs you can do so in the Quality of Service menu.

By default, our config files uses the Basic QoS Mode settings, as shown in the following pictures.

1. QoS Mode: Basic MODE
   Image Added  Image Added
   
   
2. Trust Mode: DSCP
   Image Added
   
   
3. DSCP to Queue: defaults
   Image Added

Merging Technologies SA
Paulo Tavares - ptavares@merging.com
Systems Administrator & Backend Dev.
Le Verney 4, CH-1070 Puidoux
Switzerland