| Info |
|---|
The following instructions refer to manual FW update, and are intended for advanced users. Merging Technologies recommends to use MT Portal to manage updates. |
Below is the diagram that represents the recommended path for manual firmware upgrade/downgrade:
...
Important Notes
This page and above diagram apply to ZMAN based products
Merging Hapi MkII and MkIII
Merging Anubis
Neumann MT 48
Note: the MT 48 firmware can be dowloaded from the Neumann website
Intermediate Updates:
In some cases, updating to the latest firmware version may require performing one or more intermediate firmware updates.
For example, if your current firmware version is 1.5.7, you will need to need to update to 1v1.6.2 or 1v1.6.3, before finally updating upgrading to the latest version 1(v1.7.0).
Please refer to the above diagram for instructions for each specific caseto find the recommended upgrade path for your case
| Note |
|---|
Firmware updates can introduce new features, improve performance, and enhance security. However, there is always a slight risk associated with any software update. We recommend backing up your configuration file before proceeding with the update, as explained here. |
Manual update - General Steps:
Check Current Firmware Versionthe current firmware version:
Determine the current firmware version installed on your device by tapping on “Settings → Info” on the main UI, or navigate to the “System tab” in the advanced pagesInstructions on how to check
Download the
current firmware version can be found [Link to instructions].Download the Firmware Updatefirmware update:
Download the latest firmware update file from [Link to download page]device toolkit from this page, which also includes the FW update file.
Important: Ensure you download the correct firmware update file for your specific device model.
Prepare for the Updateupdate:
[Insert relevant safety and preparation instructions here, e.g., back up important data, ensure sufficient battery charge, etc.]
Initiate the Update:
Follow the on-screen instructions within the device's settings or using the provided update tool.
Note: The update process may Make sure your device is connected to a reliable power source and consider up to 12 minutes for the whole process to be completed
Initiate the update:
Access the update page of your device as explained in this page.
The update process will take some time. Do not power off the device nor interrupt the update process.
Verify Successful Updatesuccessful update:
After the update is complete, verify that the device is running the latest firmware version.
Troubleshooting
...
If you encounter any issues during the firmware update process, refer to the troubleshooting
...
Disclaimer:
...
Firmware updates can introduce new features, improve performance, and enhance security.
...
However, there is always a slight risk associated with any software update.
...
page.