Here is how to access the Cisco SG300-10 & SG300-20 Switch's Web - Administration page.
| Info | ||
|---|---|---|
| ||
| Please note that this only applies if you are accessing the router for the 1st time. If you load one of our configuration files, the ip address for the admin page is 169.254.1.254 and the default user name and password is cisco If you are doing this without one of our config files then follow this guide. |
- Plug a network cable to the router/switch and to your pccomputer.
Make sure Set your computer haves a to use an IP configuration in the 192.168.1.x network address pool.
Info title Default Network Access config. The Cisco routers/switch's come with a default network configuration in that address IP pool.So in
Default IP: 192.168.1.254
In order for your computer to communicate with it, it will also require it to be in that same address pool.
That can be changed in the routers/switch the router/switch you must set your computer to use an IP that is in that IP RANGE.
The router/switch default IP can be changed configuration page once you are inlogged into it.
You can find more information about it in the CISCO users manual in page PAGE 8Open a navigator page to navigate to: http://192.168.1.254, you can use any navigator to do that.
Info title Access the Administration Page. Once the page loads you will be prompted to enter the user name and password to login.
Info title Access the Administration Page.
httpHTTP://192.168.1.254Enter the default Default user name: cisco
Enter the default Default password: cisco
Info title Change default user password. After the login it will prompt, you will be asked to to change that default password to whatever you want.
It is a required step and the first one into securing you're router/switch.
This , it is also a one time step only, after .
After the default is changed, if you wish to change it again
it you will have to be done from the administration page once logged indo that in the Administration page.
Reseting the switch to "factory defaults" that will also ask you to do this step again.
- The Administration page will now load and you cant start configuring your switch.
Merging Technologies SA
----------------------------------------------------
Paulo Tavares - ptavares@merging.com
Systems Administrator & Backend Dev.
Le Verney 4, CH-1070 Puidoux
Switzerland