You may connect external audio devices to MERGING+NADAC.
When an external source is selected, MERGING+NADAC automatically adapts its sampling rate to the incoming signal.
| Warning |
|---|
MERGING+NADAC can handle 1 sampling rate at a time, you cannot set the Main output and the Headphone output to 2 different sampling rates. |
Step-by-step guide
- Connect your external device to MERGING+NADAC AES, Optical or Coaxial connector.
- Start the external device
- Long press the MERGING+NADAC rotary button to access the menu.
- Select Sources and short press the MERGING+NADAC rotary button
- Select the Main source and short press the MERGING+NADAC rotary button
- Select the required external input; AES, Optical or Coaxial and short press the MERGING+NADAC rotary button.
MERGING+NADAC will now switch its sampling rate to the incoming signal if required.
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...