You may connect external audio devices to NADAC.
When an external source is selected, NADAC automatically adapts its sampling rate to the incoming signal.
NADAC can handle 1 sampling rate at a time, you cannot set the Main output and the Headphone output to 2 different sampling rates.
Step-by-step guide
- Connect your external device to NADAC AES, Optical or Coaxial connector.
- Start the external device
- Long press the NADAC rotary button to access the menu.
- Select Sources and short press the NADAC rotary button
- Select the Main source and short press the NADAC rotary button
- Select the required external input; AES, Optical or Coaxial and short press the NADAC rotary button.
NADAC will now switch its sampling rate to the incoming signal if required.
Related articles