Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

  • RAVENNA user should avoid connecting multiple Horus / Hapi, MassCore, ASIO or VAD to any a router/Network not certified by Merging.
  • Refer to the Merging RAVENNA validated switches page for all details on the Merging certified RAVENNA switches.
  • Only Merging RAVENNA devices can be connected to the Merging PCIe Ethernet Controller Card NET-MSCGBEX1. 
  • Only RAVENNA devices should be connected on RAVENNA network, do mot mix with devices like Controllers such as Tango/Isis/Euphonix or other network devices. 
  • 100MB Ethernet devices should be connected on RAVENNA network.
  • Please also note that Windows cannot handle different networks in the same address range. For example, Windows cannot handle the Horus plugged on NIC 1 and a NAS plugged on NIC 2 if both devices uses the 169.254.xxx.xxx address range. You need to change one of the device and its NIC to another range, 192.168.xxx.xxx for example.

  • No labels