/
RAVENNA Switch
RAVENNA Switch
- RAVENNA user should avoid connecting multiple Horus / Hapi, MassCore, ASIO or VAD to any router/Network not certified by Merging.
- Refer to the Merging RAVENNA validated switches page for all details on the Merging certified RAVENNA switches.
- Only Merging RAVENNA devices can be connected to the Merging PCIe Ethernet Controller Card NET-MSCGBEX1.
- Only RAVENNA devices should be connected on RAVENNA network, do not mix with devices like Controllers such as Tango/Isis/Euphonix or other network devices.
- 100MB Ethernet devices should not be connected on RAVENNA network.
- Please also note that Windows cannot handle different networks in the same address range. For example, Windows cannot handle the Horus plugged on NIC 1 and a NAS plugged on NIC 2 if both devices uses the 169.254.xxx.xxx address range. You need to change one of the device and its NIC to another range, 192.168.xxx.xxx for example.
, multiple selections available,
Related content
Setting up RAVENNA and Office VLANs across multiple switches
Setting up RAVENNA and Office VLANs across multiple switches
More like this
Merging RAVENNA Advanced Pages User Guide.
Merging RAVENNA Advanced Pages User Guide.
More like this
RAVENNA ASIO recommended Network Adapter
RAVENNA ASIO recommended Network Adapter
More like this
Dell PowerConnect 2816 - 2808 Auto-configuration
Dell PowerConnect 2816 - 2808 Auto-configuration
More like this
ASIO - MAD Infrastructure pack.
ASIO - MAD Infrastructure pack.
More like this
MassCore ST2022-7 configuration.
MassCore ST2022-7 configuration.
More like this