Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Problem

When switching sampling rates on an EMM Labs SACD player connected on the MERGING+NADAC AES input (switching from CD to SACD or SACD to CD), there are many audio clicks and distorted audio for at least 30 seconds.

Solution

The synchronization signal is not as expected by MERGING+NADAC, and it takes a very long time to be properly synchronized.

You need a specific NADAC Fimware to work with the EMM Labs player.

  1. Download the specific NADAC Firmware for EMM Labs : EMMlabs_Firmware_fix
  2. Unzip the file.
  3. Start NADAC in Maintenance mode (see this page on how to start in Maintenance mode)
  4. Update to Firmware_3.5.0_30657.NADAC or above.
  5. Reboot NADAC a second time in maintenance mode .
  6. Update the EMMLabs_special_mode.NADAC as if it was a firmware.
     
    This should solve sync and glitches issues in AES when the EMMlabs is used along with the MERGING+NADAC.

    To revert the firmware and NADAC to is original state update the EMMLabs_special_mode_reset.NADAC file.

 

 

  • No labels