In Ovation Native, you can also use the LTC in and out coming from your Horus or Hapi device.
Prerequisites
Ovation 5.1.x or above required
SUB D15 Sync breakout cable (CON-D15-VTC)
- Plug your the Sub D15 Sync cable on your Horus/Hapi
- Plug your LTC input and or output on this cable
- Start Ovation
- Connect the Horus / Hapi LTC to MassCore :
- You can now use this LTC1 as LTC source or generator port.
LTC1 is always the MassCore TimeCode in ovation.
It is highly recommended to use a common video ref between Horus/Hapi and the other devices that will use the TimeCode.
Otherwise, the synchronization between the devices will drift over time.