MERGING+PLAYER and MERGING+NADAC Maintenance modes are not compatible ! Please review update instructions carefully. At the Firmware update users could be warned that their Maintenance Mode is not up to date. In such case it is important to follow the Maintenance Mode update procedure prior to updating to the latest Firmware. |
Start your default web browser (Merging recommends Google Chrome or Apple Safari), and enter the following address:
http://yourdeviceIPADDRESS:8080 |
In the example below, the device IP address is 10.0.0.32. (same applies for both MERGING+NADAC and MERGING+PLAYER)
This address is then automatically translated and redirects you to the firmware update page.
During update do not update or refresh your browser (F5), until the process is completed. The Maintenance mode update should can take up to 3 minutes. Do not perform any other installation during the firmware upgrade. Do not shutdown the device during the update. |
Wait until the webpage says “Update successful!” and the screen displays “Reboot device”.
(same applies for both MERGING+NADAC and MERGING+PLAYER)
Shutdown your device after the Maintenance mode update by clicking on the "Reboot device" button in the web page, it will restart automatically afterwards.
You can now update your device with the latest firmware.
Please follow the firmware update procedure for your device:
MERGING+NADAC Firmware Update Procedure
MERGING+PLAYER Firmware Update Procedure
IMPORTANT: If the Maintenance Mode update procedure fails, repeat the update procedure by pressing the “Try Again’ Button (it will bring you back to step 5) Avoid powering down the unit if the Maintenance Mode update has failed. Contact your nadac@merging.com and your local Sales partner if your Maintenance Mode update cannot be executed. |