Use Anubis SPS redundant / dual network feature to run a secondary - backup recorder.
For this specific workflow the Anubis must be set to network switch mode.
Go to the Anubis General settings and disable ST2022-7.
A reboot is required.
Use Anubis SPS redundant / dual network feature to run a secondary - backup recorder.
For this specific workflow since we are here on two different networks (RAVENNA & Home) the Anubis must be set to ST2022-7 mode.
Go to the Anubis General settings and enable ST2022-7.
A reboot is required.
Network 1 and 2 should be on different IP range
In our example we will set Network 1 on IP 192.168.1.107 subnet mark 255.255.255.0), and Network 2 on IP 169.254.1.2 subnet mark 255.255.0.0.
Go to manual mode if you need to edit those.
On the primary computer , set the RAVENNA/AES67 network adapter in the same IP range as Anubis Network 1, in our example 192.168.1.99 subnet mark 255.255.255.0.
On the secondary computer , set the RAVENNA/AES67 network adapter in the same IP range as Anubis Network 2, in our example 169.254.1.99 subnet mark 255.255.255.0.
Please consult this page for further help on IP addresses manual configuration.
First Ethernet Port Web Server is available on port 80 (i.e. 192.168.1.107:80) |
A secondary - redundant computer can be used as a backup recording device.