Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Make sure that your QoS settings are as show on the next 3 screenshots.
They should by default allready be configured as shown but if case it differs in your switch
set them up as show in the pictures.

 

  1. Check "Basic QoS Mode"
  2. Make sure the DSCP to Queue is as shown (should be by default)
  3. Make sure the Global Settings in Trust Mode you have it as shown.

 

  • No labels