2. Setup 1 - Single VLAN.

Owned by Paulo Tavares
Last updated: Dec 15, 2017 by David Jacques
1 min read

Setup Overview

This guide will explain how to setup your Switch 10 or 20 ports to use a single vlan for the Ravenna AES67 network.
Its in no case an extensive guide and only provides the defaults required to use the CISCO switch's for Ravanna networking.

Table of contents:

2.1. Change Switch IP address to APIPA
2.2. Change IGMP settings
2.3  Change Green Ethernet settings
2.4. Change QoS settings.