...
Info |
---|
Note :
|
Table of Contents |
---|
Recommended Switches
Brand | Model | Ports | Remarks | |
---|---|---|---|---|
Artel | Quarra PTP range (StagedBox) | 8+2SFP | PTP aware switch | Configuration Guide |
Aruba | 2930M | 44+4SFP | Not fully tested by Merging, but reported to work on RAVENNA | |
Cisco | SG-300-10 / 20 | 8+2 /16 +4 (sfp or copper) | Configuration Guide | |
Cisco | SG-350-10 | 8+2 (sfp or copper) | Configuration Guide | |
Cisco | SG-350-10P | 8+2 (sfp or copper) | PoE+ up to 60W (Max 3 Anubis POE per switch) | Configuration Guide |
Cisco | CBS350-8P-2G / 8P-E-2G / 8T-E-2G | 8+2 (sfp or copper) | PoE+ up to 67W (Max 3 Anubis POE per switch) | Configuration Guide |
Dell | PowerConnect 2808/2816 | 8 / 16 ports | Legacy - discontinued | Configuration Guide |
Netgear | Netgear M4250 | 8 to 48 with 1/2.5/5/10G | Easy VLAN config, pre existing profiles | Select the AES67Audio profile |
Not recommended switches
...
Brand | Model | Remarks | |
---|---|---|---|
Dell | X1000 serie | PoE | |
Dell | X1008P | PoE (<15.4W) | PoE not sufficient for Anubis |
Zyxel | GS1200-8HP | PoE | IGMP does not work |
Ubiquiti | UniFi US-8-60W | PoE | No QoS. Need external software controller, not supported by Merging's support |
TP Link | TL-SG108PE | PoE | PoE may not be sufficient for Anubis. QoS hardcoded. |
Netgear | GS305/308 E P GS310TP | PTP issues |
Additional recommendations on manual configurations
If you plan to use a non validated switch, or use a custom configuration, please see the following recommendations :
- Immediate Leave should be disabled (can cause sink issues if the computer OS does not react fast enough)