/
Ovation V9 Known issues.

Ovation V9 Known issues.

Sept 15, 2020

 

  • For installation information please refer to the Ovation V9 Installation Guide.

  • Ovation 9 requires new keys as of the Release Candidate. Merging also has redone the Packs and Options.
    Warning: Users with v8 keys will not be able to run Ovation as of version 9 RC1.

  • Ovation v9 shows are not backward compatible with Ovation 7.x, users must perform a Save Special > Save Show as Version 7 in order to open such show in Ovation 7.x
    Note: Ambisonic v8 & 9 Shows are not fully compatible with Ovation v7

  • The VB Plugins (VS3) are no longer installed along Ovation as of the version 9 they come with a standalone installer.
    Download and run the VB Plugin – VS3 installer after having installed Ovation. See this page for details

  • Ovation Launch: Be patient before opening show, wait until Ovation is fully launched, as screen can become unresponsive during Ovation Startup.

  • Ambisonic decoders only decode to Virtual Rooms with standard channel types and positions. If a custom room is needed, then they need to first decode to a standard bus, having speakers as close as possible to the custom room, then send that bus into the custom bus through a GPS strip.

  • Ambisonic support: Pyramix Mixer currently does not allow multichannel connections for an Ambisonic input Strip for remote MicPre.
    Please use the Web Access PreAmps page for Horus and Hapi

  • MTFF file format is not suitable for ultimate performance. Please in such case use BWF/WAVE.

  • Merging recommends that all cues are at the Show sampling rate for best performance.

  • Merging recommends for the best performance that all media cues are played from SSDs if RAID configuration is required.