/
How to use Crossfeed in Headphones monitor

How to use Crossfeed in Headphones monitor

Crossfeed only applies to Headphones. It is the process of blending the left and right channels of a stereo audio recording. It is generally used to reduce the extreme channel separation when monitoring with headphones vs. speakers (e.g., where instruments are panned entirely on one side or the other). Apply Crossfeed to make audio played through headphones sound more natural, as when listening to a pair of external speakers. Select and turn the Anubis Rotary Knob to apply. Range: 0 (no crossfeed applied) to 100% (equivalent to mono).

How to use it in Monitor Mission

  • Long press on the Pyramid button

  • Go to settings

  • Go to “Monitors”

  • Click on your Headphone monitor

  • You can adjust the crossfeed with the "CROSSFEED" setting

How to use it in Music Mission

  • Long press on the Pyramid button

  • Go to settings

  • Monitoring

  • You can adjust the crossfeed with the "HEADPHONES CROSSFEED" setting

Related content

RECORDING SETUP (Monitoring Mission).
RECORDING SETUP (Monitoring Mission).
More like this
Connecting an external audio device to MERGING+NADAC
Connecting an external audio device to MERGING+NADAC
More like this
MASTERING ANUBIS & DAW SETUP.
MASTERING ANUBIS & DAW SETUP.
More like this
2. Connecting Anubis using ANEMAN to Monitor a Source
2. Connecting Anubis using ANEMAN to Monitor a Source
More like this
BASIC MUSIC MISSION SETUP.
BASIC MUSIC MISSION SETUP.
More like this
Creating an Ultra-Low Latency Cue
Creating an Ultra-Low Latency Cue
More like this