Pyramix V12 Known Issues.

We recommend users to use the latest v12 key they received, as it could enable some functionalities depending of the pack in use.
For installation information refer to the Pyramix V12 installation guide.
Custom installation not recommended, under certain scenario some components will not install correctly (registration dll error).
Pyramix v12.0 Projects are not backward compatible with Pyramix v11.1, users must perform a “Save Special as v11.1” in order to open such project in Pyramix v11.1.
Note: Ambisonic v12 Projects are not fully compatible with Pyramix v11.1
Ambisonic support : Ambisonic Bus channel types cannot be changed.
Ambisonic support: Panner Divergence control has no effect in Ambisonic Encoding/Panning for now
Ambisonic support: Pyramix Mixer currently does not allow multichannel connections for an Ambisonic input Strip for remote MicPre.
Please use the Web Access PreAmps page for Horus and Hapi
The default record format at project creation was changed from PMF to BWF for recovery and compliance reasons, users that wishes to use PMF can still do so.
Waves plugins users running with an NVidia graphic card should make sure that they have the Threaded Optimization OFF, if set to ON it may cause issue with Waves VST plugins.
Refer to link here: https://merging.atlassian.net/wiki/display/PUBLICDOC/Graphic+cards+recommended+settings
Background Recorder will record in the last mounted folder if no folder was selected when engaging the Background Record
PMX111-19: Generate CD Image' 'Digital Release' 'Album publishing' with more than 99 index not supported (Redbook limitation)
PMX111-71: Mixer: Losing metering if rebuilding a Mixer if the Delay Compensation is OFF
Workaround: Put Delay Compensation ON or do a second Mixer Rebuild.
PMX111-222: We recommend to use the Media Manager detailed View for stability reasons
PMX111-147: FXRendering using plugin's such as RX6 De-Click from Izotope can cause a Pyramix Freeze/Crash in preview (reported to iZotope)
PMX111-184: Mixer: BusTool and Strip tool incoherency when added or moved in Mixer, rebuild mixer or scroll to update UI accordingly
PMX111-22: When 2 overlapping clips reference the same media with different sampling rate than project, noise will occur on the overlapping section.
Convert those medias to the project's sampling rate, prior to using such a workflow.
GAIA-1020: Mixdown with Metronome active in a project at another sampling rate than 44.1kHz could potentiall cause a crash
Final Check Metering: Not supported under DXD and limited to 6 channels.
Fixed cursor mode not recommended for realtime playback editing
Black magic Design ASIO driver can conflict with ASIO4ALL, causing VS3 Control Panel to crash.
Windows 7 MassCore users could see a Configuration warning message despite having correctly configured their system.
In such case follow procedure at end of this page.
v12.x Libraries format are not compatible with older Pyramix release as v7.1.
Save as v7.1 is available in the Library menu.
Pyramix has a warning message of “Not Enough Streams available”.
This happens when reaching the maximum record inputs available. In such case we recommend that you reduce your inputs number count or disable the Background Recorder that are consuming inputs.
If afterwards you get a constant Message Box “Re-activating Project” at each Playback start, close and re-open your project to avoid this.
Be aware that under the VS3 Control Panel if you have enable the Secondary Device/ASIO bridge or Rewire active, you will consume Streams, disable this option if not in use.
Pyramix Multi channel PreAmps support
Multichannel MCS strips do not support the PreAmps control but VCA strips does.
Make sure that you install the latest Horus / Hapi Firmware for proper communication.
Mixer Automation Bus Aux Send.
We advise that users do not automate the ON/OFF of Buses Aux Send and instead simply automate the Gain of the Aux. As this could cause Delay Compensation issue.
V12 project containing new Buses layout/Structure cannot be saved within a Save Special v9.0 project.
Pyramix v12 project containing the new Buses layout/Structure cannot be saved within a Save Special v9.0 project as warning message will prevent you from doing so.
For VST plugin support look under the 3rd party software page if you have issues with some specific plugin Third-Party Software
Mono Legacy Bus conversion
Legacy Bus conversions. Due to the architecture of the new busses, mono mix busses are now converted into Mono Aux busses and not anymore to Mono Mix busses as Mix busses have no gain control.
Pyramix Video
Video Wrap dialog hidden at times, user must use the ALT key to bring it top most.
Pyramix video consolidate is not supported.
Pyramix video might not following when using the nudge (<>) option.
With Blackmagic Design cards a reverse playback may introduce an offset delay.
With Blackmagic Design cards the delay might not be correct when chasing without stopping first.
PMF in Mixdown
PMF File format was removed from the Mixdown formats as of Pyramix v11.1 due to compliance issues. As of Pyramix v11.1 our recommendations are:
- For Recording: as of Pyramix v11.1 the default record format is BWF, for compliance reasons
- For Mixdown: MTFF is recommended
- For Album Publishing: Formats of your choice through Digital Release for better signal flow
- For Render: We recommend rendering in the original format or to PMF or MTFF. The DSDIFF is not recommended.