MERGING+NADAC DC power input

NADAC is delivered with a DC input capability, a 4 pins connector (HR10A-7R-4S) is installed left to the AC power connector. The mating part which can be ordered separately is a Hirose HR10-7P-4P.

The DC Power input is only available on MERGING+NADAC, not on MERGING+PLAYER.
If you want to use a dedicated power supply, have a look at our MERGING+POWER device.

The pinout of this connector is:

- Pin 1: GND

- Pin 4: 12V

- Pins 2 and 3: not connected

The DC power input accepts voltages from 10V to 14V for a maximum power consumption of 30W.

Merging Public Document

MERGING+NADAC DC power input

Analytics

Related content