/
Connecting an external audio device to MERGING+NADAC

Connecting an external audio device to MERGING+NADAC

You may connect external audio devices to MERGING+NADAC.

When an external source is selected, MERGING+NADAC automatically adapts its sampling rate to the incoming signal.

MERGING+NADAC can handle 1 sampling rate at a time, you cannot set the Main output and the Headphone output to 2 different sampling rates.

Step-by-step guide

 

  1. Connect your external device to MERGING+NADAC AES, Optical or Coaxial connector.
  2. Start the external device
  3. Long press the MERGING+NADAC rotary button to access the menu.
  4. Select Sources and short press the MERGING+NADAC rotary button
  5. Select the Main source and short press the MERGING+NADAC rotary button
  6. Select the required external input; AES, Optical or Coaxial  and short press the MERGING+NADAC rotary button.

    MERGING+NADAC will now switch its sampling rate to the incoming signal if required.

 

Related content

Clock sources
More like this
Install the Merging Audio Device driver for MERGING+NADAC on Windows.
Install the Merging Audio Device driver for MERGING+NADAC on Windows.
More like this
Configure JRIVER with MERGING+NADAC on Windows
Configure JRIVER with MERGING+NADAC on Windows
More like this
Configure AcourateConvolver with MERGING+NADAC on Windows
Configure AcourateConvolver with MERGING+NADAC on Windows
More like this
MERGING+NADAC and Merging Audio Device WDM configuration.
MERGING+NADAC and Merging Audio Device WDM configuration.
More like this
Update to the Merging Audio Device driver for MERGING+NADAC on Windows.
Update to the Merging Audio Device driver for MERGING+NADAC on Windows.
More like this