/
Cisco SG350 Routers Manual Switch Configuration
Cisco SG350 Routers Manual Switch Configuration
- David Jacques
Owned by David Jacques
General Info.
This is in no case an exhaustive configuration procedure, It's a simple guide on how to configure these switches to use them with Ravenna/AES67 networks.
Connecting several Cisco switches together requires additional configuration.
Please also see the Multiple network switches considerations page and Cisco SG300/350 Multiple switches configuration guide.
Table of contents.
1. Access SG350 switch Administration
- Accessing the configuration page.
- Changing the default user password.
- Change Switch IP.
- Change IGMP settings.
- Change Green Ethernet settings.
- Change QoS settlings.
- Adding a VLAN
- Change VLAN IP Address
- Change IGMP settings.
- Change Green Ethernet settings.
- Change QoS settlings.
4. Backup Switch Configuration
- Backup Running Configuration
- Backup Backup Configuration
- Backup Default Configuration
5. Import Switch Configuration.
- Import configuration from a file.
- Save configuration to running config.
Related content
2. SG-350 - Single VLAN configuration
2. SG-350 - Single VLAN configuration
More like this
Network Switches for RAVENNA - AES67
Network Switches for RAVENNA - AES67
Read with this
Cisco SG350-10 Auto-configuration.
Cisco SG350-10 Auto-configuration.
More like this
Merging Support Knowledge Base
Merging Support Knowledge Base
Read with this
Cisco CBS350 Managed switch manual configuration.
Cisco CBS350 Managed switch manual configuration.
More like this
Graphic cards recommended settings
Graphic cards recommended settings
Read with this