3.3 Change Device IP for VLAN2

This explains how to change ip for VLAN2 so the admin page of the switch can also be reached from VLAN2

1. Go to "Administration" then click "Management Interface" and then "IPV4 Interface", the following pane will open in the right.
   
   
   
   

2. In Management VLAN choose 2 and on IP Adress type in the IP Adress you want.
   I suggest you use the settings as shown in the picture bellow.

   Note

   For VLAN2 appear on "Management VLAN" you will have to have something connected to it (at least one port in USE).

   
   Save your settings, and reboot the device.